Native control interface: Set my setpoint temperature

You can adjust your setpoint temperature using the dial.

• If you haven't activated the programming:

Your temperature setting will apply until a later manual adjustment is made.

• If you have activated the internal programming (see Native Programming)

When adjusting the programmed temperature setpoint (the temperature set in the radiator programming), this automatically triggers a temporary override of 2 hours (by default). On the screen, you will see an hourglass indicating when the override will end.

To modify the duration of the override while it is in progress, simply press the dial. This will display an hourglass on the screen. Then, press the dial again and select the "Duration" option.

• If you are connected with intuis connect with Netatmo:

When you adjust the programmed temperature setpoint (the temperature set in the programming created in the application), it's a temporary override for a duration of 3 hours.

To modify the duration of this override, you can use the Intuis Connect with Netatmo application.